“Send it at 300 DPI” is one of the most repeated and least understood instructions in working with images. It sounds like a quality setting. It is not: on its own, a DPI number says nothing about how good or how large an image is. What matters is how many pixels the image has. This guide explains the relationship between the two, so you can work out the size any image needs to be.
A Digital Image Is Only Pixels
An image file is a grid of coloured squares: so many across, so many down. A photo that is 3000 × 2000 has six million of them, and that is the whole of its resolution. It has no physical size. It is not three inches wide or thirty; it is 3000 pixels wide, and how large that appears depends entirely on what displays or prints it.
What DPI Actually Is
DPI means dots per inch (for images, PPI, pixels per inch, is the more exact term, and the two are used interchangeably). It is a density: how many of the image’s pixels are placed along each inch of paper when it is printed.
That gives one small formula, which is the only one you need:
pixels = inches × DPI
A print six inches wide at 300 DPI needs 6 × 300 = 1800 pixels across. Turned around, a 3000-pixel-wide image printed at 300 DPI comes out 10 inches wide; printed at 150 DPI it comes out 20 inches wide, with each pixel twice as large on the paper.
Why DPI Means Nothing on a Screen
Image files can carry a DPI value in their metadata, and this is the source of most of the confusion. Browsers, phones and almost all screen software ignore it completely. A 1200-pixel-wide image saved at 72 DPI and the same image saved at 300 DPI are identical on a web page: same pixels, same file size, same appearance.
So changing an image “from 72 DPI to 300 DPI” without changing its pixel dimensions changes one number in the file and nothing else. It does not add detail. For anything that will only ever be seen on a screen, ignore DPI and think in pixels.
Sizing Images for a Screen
On a web page an image should be about as many pixels wide as the space it is shown in, multiplied by two to stay sharp on high-density screens such as recent phones and laptops. An image displayed in a 600-pixel column is well served by a file 1200 pixels wide. Much more than that is downloaded for nothing.
Social networks and marketplaces publish their own recommended pixel sizes, and they are always given in pixels, never in DPI, for the reason above.
Sizing Images for Print
Print is where DPI matters, because paper has a real size. The usual targets are:
- 300 DPI for anything held in the hand and looked at closely: photo prints, brochures, business cards, magazines.
- 150 DPI for things seen from a step or two away: posters and wall prints.
- Lower still for banners and signs seen from across a room or a street. Viewing distance hides the pixels.
Multiply the print size in inches by the DPI to get the pixels you need. If you work in centimetres, divide by 2.54 first.
Reference: Pixels Needed at 300 DPI
- 10 × 15 cm photo: 1181 × 1772 pixels
- 4 × 6 in photo: 1200 × 1800 pixels
- 5 × 7 in photo (about 13 × 18 cm): 1500 × 2100 pixels
- 8 × 10 in print (about 20 × 25 cm): 2400 × 3000 pixels
- A5 (148 × 210 mm): 1748 × 2480 pixels
- A4 (210 × 297 mm): 2480 × 3508 pixels
- A3 (297 × 420 mm): 3508 × 4961 pixels
- US Letter (8.5 × 11 in): 2550 × 3300 pixels
For 150 DPI, halve each number.
How Large Can You Print the Image You Have?
Run the formula the other way: divide the pixel dimensions by the DPI. A 12-megapixel photo, 4000 × 3000 pixels, prints at 300 DPI up to about 13 × 10 inches (34 × 25 cm), a little larger than A4. At 150 DPI the same file makes a clean 27 × 20 inch poster.
This is also how to check a file before sending it to a printer. If someone asks for an A4 image at 300 DPI and your file is 1200 pixels wide, it is less than half the width required, whatever DPI value is written in it.
When the Image Is Too Small
Enlarging an image does not recover detail that was never captured. Software can only estimate the pixels in between, and the result is softer than a photo taken at the larger size would have been. That said, the estimate can be good or bad: a careful resampling method keeps edges clean where a crude one produces blur or blocks, and a modest enlargement of up to about double is often perfectly acceptable in print.
If you need more than that, the honest options are to print smaller, to accept a lower DPI for something viewed from a distance, or to go back to a larger original.
Setting the Size in Practice
You can do the arithmetic yourself, or enter the print size directly. Our bulk image resizer accepts centimetres, millimetres or inches together with a DPI, calculates the pixels, and writes the DPI value into JPG and PNG files so that layout and print software place them at the intended size. It works on a whole folder at once, in your browser.
Frequently Asked Questions
How many pixels is 300 DPI?
It depends on the print size, because DPI is pixels per inch. Multiply the size in inches by 300: a 4 × 6 inch print needs 1200 × 1800 pixels, an A4 page 2480 × 3508.
Is 72 DPI enough for the web?
The DPI value is irrelevant on the web; browsers ignore it. What matters is that the image has enough pixels for the space it is shown in, ideally about twice the displayed width.
Can I convert a 72 DPI image to 300 DPI?
You can change the number, and print software will then place the image at a smaller physical size. That does not add detail. To print larger at 300 DPI you need more pixels, either from a larger original or by enlarging the image.
Does a higher DPI make the file bigger?
Not by itself. File size depends on the number of pixels and the compression. Two files with the same pixels and different DPI values are the same size.